Plextor PX-40TSe, Руководство по эксплуатации

Страница: 48 / 94

Using CD-ROM Discs
and Trays
YOUR TASK: Learn how to handle, load, and care for your discs.
YOUR OBJECTIVE: Protect your discs. Insert and eject discs properly so
your drive operates without interruption.
YOUR METHOD: Practice loading discs into trays.
Tray Loading and Operating
1) While the drive is powered up, push the Eject button. The tray drawer
will slide out in 2–3 seconds.
2) Lay the bare CD into the depression in the tray, label side up. If the
drive is mounted in the horizontal position and the CD lays flat in the
drive, you do not need to use the
clips in the tray. If the drive is
mounted in the vertical position
(on its side with the tray
perpendicular to the ground), the
clips should be gently pushed into
place over the CD so that it does
not fall out of the tray.
3) Press the Eject button again and
the tray will slide shut within 2–3
seconds.
NOTE: We recommend you use the Eject button to close the tray in a smooth
and secure manner. Closing the tray by pressing the front of the
drawer by hand is not recommended and risks damage or premature
wearing of the mechanism.
— CHAPTER 10 —
42
ULTRAPLEX 40X OPERATION MANUAL