Plextor PlexWriter 12/10/32S, Руководство по эксплуатации

Страница: 76 / 88

Appendix B: Installing a SCSI Drive in Windows
72
PlexWriter 12/10/32S Operation Manual
Troubleshooting Windows NT SCSI Installations
If you have difficulty getting NT to recognize your CD-RW drive and SCSI interface
board, confirm that all of your hardware is operating properly. This is best done by
using a boot floppy disk with CD-ROM support, or by simply installing DOS with
the appropriate SCSI ASPI layer support and CD-ROM drivers.
•
If your system does not work under DOS, you probably have a hardware problem
that needs to be resolved before you can go any further.
•
If your system works under DOS, but not NT, review your device driver
installation and verify that the SCSI interface board device driver and CD-ROM
drive support are loaded correctly.