Plextor PlexWriter 12/10/32S, Руководство по эксплуатации

Страница: 26 / 88

Section 2. Installing Your PlexWriter SCSI Drive
22
PlexWriter 12/10/32S Operation Manual
5. Remove the cover plate for this slot from the back panel of your computer. Keep
the screw from the cover plate nearby, as you will need it in a moment. Save the
cover plate in case you need it at a later date.
Figure 10: Removing the Cover Plate
6. Plug the SCSI interface board into the slot you have selected. Rock the board
from end to end to ensure that it seats firmly in the slot. Don’t force it. If you
cannot push the board down completely into the slot, remove the board and try
again.
7. Once you have successfully inserted the board, fasten it in place using the cover
plate screw that you removed earlier.
Install a PlexWriter Internal SCSI Drive
This section explains how to install a PlexWriter internal SCSI drive in a PC. If you
have an external SCSI drive, go to the section titled “Install a PlexWriter External
SCSI Drive” on page 28.
Before proceeding, double-check your SCSI number setting, SCSI termination
setting, and other jumper-controlled settings.
Record the Serial Number
Record the serial number and TLA code of your drive on the inside front cover of
this manual.