PLEXPACK MPS6100, Продуктовая документация

Страница: 47 / 76

MPS6100 MAINTENANCE MANUAL
ORIGINAL INSTRUCTIONS Page 19
5.1 SURFACE CLEANING
If liquid has been spilled on the surface of the machine but has not entered the
internal areas of the machine proceed to wipe the area dry with a cloth or paper towel.
Stubborn materials may be scrubbed off the surface of the machine with a damp cloth and a
light cleaning solution if needed. Do not allow moisture from the cloth or the cleaning
solution itself to enter the internal area of the machine as this can damage the electrical and
mechanical components contained within. Gently spraying compressed air is another means
of eliminating dirt from the machine’s interior.
CAUTION: All spills located on the floor directly in the operators foot print must also be
immediately cleaned to prevent people from slipping and falling while operating the
machine.
5.2 INTERNAL CLEANING
Never use corrosive solvents when cleaning the MPS. Water and light liquid detergents,
along with a clean cloth are all that is needed to clean the interior of the machine.
CAUTION: Never subject this machine to a “wash-down” procedure or expose the internals
of the machine to liquids of any kind. This will damage the electrical and mechanical
components of the machine.