PLEXPACK MPS6100-M, Руководство по эксплуатации

Страница: 23 / 69

MPS6100-M OPERATION MANUAL
ORIGINAL INSTRUCTIONS Page 12
3.3 ADJUSTING THE HEAD HEIGHT
The sealing head height is easily adjusted via the crank mechanism on the
stand. To increase the head height, rotate the wheel on top of the stand. See Figure
#3 for location of the hand wheel on the stand.
3.4 SETTING THE SEAL TEMPERATURE
There are four buttons that operate the digital temperature controller and
two digital displays as shown in Figure #9. Please refer to Figure #2 for the location
of the temperature controller.
1) The Level key – Locked out. For maintenance use only.
2) The Display key – Locked out. For maintenance use only.
3) The Up key – Move the set point value up.
FIGURE - 8