PLEXPACK MPS6100-M, Руководство по эксплуатации

Страница: 25 / 69

MPS6100-M OPERATION MANUAL
ORIGINAL INSTRUCTIONS Page 14
3.5 SETTING THE SEAL SPEED
To set or change the speed, use the up/down arrows on the digital speed control
unit. See Figure #2 for location of the speed controller. The digital display on the speed
control is set to read in meters per minute. Be sure to record both speed and temperature
settings for future reference. If you experience difficulties in obtaining an optimum seal,
contact Plexpack Technical Support for assistance.
3.6 ADJUSTING SEALING AND COOLING BAR PRESSURE
To adjust the sealing and cooling bar pressure the in-feed rail must be lowered. Due
to the fact that this exposes the operator to moving components it is recommended that a
qualified service technician perform this procedure. Refer to the maintenance manual for
instructions.
CAUTION: Exposure to moving parts and hot surfaces if the proper precautions are not
taken. Only qualified service technicians should attempt this procedure.
Do not attempt if
loose clothing, jewellery and/or hair are present, they may become entangled.
FIGURE -10
Enter
Increase
Decrease
Current Speed