66
vDisplay HDI-Pro IP Engine User Guide
Switching Channels
After the channels have been configured, you can select and then change the channel (streaming video)
you want to view on your display device. There are two methods for selecting the channel: you can select
the channel in the
GEV Device Control
dialog box or you can select the channel by pressing the channel
button on the vDisplay IP engine.
To switch channels using the GEV Device Control dialog box
•
In the
DisplayChannelTunerControl
section of the
GEV Device Control
dialog box, select a
channel number from the
ChannelSelector
list.
Only the channels that have been created appear in the
ChannelSelector
list; if channel 2 is not created,
it does not appear in the list. Also, you can switch channels from 2 up to 3, but you cannot switch channels
in the other direction from 32 down to 31. You have to cycle through the channels in one direction until you
get to the desired channel.
If you use the physical channel button to change a channel, the new channel number is updated in the
ChannelSelector
list.
To switch channels using the buttons on the vDisplay IP engine
•
Press the channel buttons on the side of the vDisplay IP engine.
Currently, only the main
Channel
button is in use.
