35
Setting up and Configuring vDisplay IP Engines
Viewing Video
After you have configured the multicast video transmission, you can view the streaming video on the
connected display device and in GEVPlayer.
To view video on the connected display device and in GEVPlayer
1.
Follow steps 1-9 in Figure 6 on page 34 to configure the camera.
Do not select
Controller
as the GEVPlayer role; if you select
Controller
, you cannot view video in GEVPlayer,
as shown below.
2.
In the GEVPlayer, click
Play
.
After configuring the vDisplay IP engine, you no longer need to maintain its connection to GEVPlayer.
However, the connection between the camera and GEVPlayer must be maintained.
