Planex mini-mfp, Руководство пользователя

Страница: 65 / 101

4
58
Mini-MFP
4
4
4
8
œ
Supported Protocols
ų
Enable LPR (Line Printer Remote) Printing: select or clear Enable LPR
Printing support. It is enabled in Factory Default.
ų
Enable IPP Printing: select or clear Enable IPP Printing support. It is
enabled in Factory Default.
ų
Enable Raw TCP Printing: select or clear Enable Raw TCP Printing
support. It is enabled in Factory Default and users may set the protocol's
TCP ports as following boxes:
-TCP Port 1: set TCP port for the printer of USB1 port (default: 9100)
-TCP Port 2: set TCP port for the printer of USB2 port (default: 9101)
ų
Enable SMB/CIFS Print/File Server: select or clear Enable SMB/CIFS
Print/File Server support. It is enabled in Factory Default.
-Enable Internet Access: select or clear Enable Internet Access support. If
you clear the item, you do not allow that users can access your SMB/CIFS
server via Internet. If you select the item, you allow Internet users can
access your storage using the SMB/CIFS protocol.
-Enable Server Authentication: select or clear Enable Server
Authentication support. Select the item, if you want to share your storage
or printer with user level security which requires user name and password
to login. If you clear the item, your storage will be shared without security.
ų
Enable FTP Server: select or clear Enable FTP Server support. It is
enabled in Factory Default and users may set some parameters as
follows:
-FTP Port: Enter an integer number to set FTP server's TCP port (default: 21)
-Set Maximum Session Number: select or clear Set Maximum Session
Number support. You can limit the FTP session number by selecting the
support and enter an integer to set the allowable maximum session number.
If you clear this field it means that FTP server will have no limitation in
session number.
-Set Passive Mode: select or clear Set Passive Mode support that FTP
server can accept passive mode.