Planex mini-mfp, Руководство пользователя

Страница: 16 / 101

3
8
Mini-MFP
3.2.2 Ethernet Address
You do not need to know the Ethernet address of your Server for assigning
an IP address to it. The Control Center can automatically search Servers
and list their Ethernet addresses. Besides, you can find Ethernet address
that is located on the backside label of the Server.
3.2.3 IP Address
Unless you are assigning an IP address using DHCP, you must obtain an
unused IP address from your network administrator.
3.2.4 Methods for Setting the IP Address
You can set the IP address of your Server using one of the following
methods, depending on your network operating environment:
œ
Automatic IP Address Assignment
œ
Manual IP Address Assignment
3.2.5 Host Names and Host Name Rules
The Host Name of the Server defaults to be
ņ
Mini-MFP
Ň
. If you put two
or more Servers in your local area network, to avoid using the same Host
Names you have to change the Host Names by using the Control Center or
the Server
Ņ
s web pages. If your Host Name is longer than 15 characters,
the Server uses only the first 15 characters.
3.2.6 Setting the IP Address Using DHCP
Follow the instructions below to get an IP address using DHCP:
1.Edit or create a scope in the DHCP manager of the DHCP daemon. The
entries included in this scope should contain the following parameters:
œ
range of IP addresses
œ
subnet mask
œ
default router IP address
œ
DNS server IP address
œ
lease duration