Planex mini-mfp, Руководство пользователя

Страница: 78 / 101

71
Chapter9 The NetUSB Technology
9
D.Choose the desired printer. The desired printer must be the Windows
printer (this is a logical printer) that matches the printer attached on the
MFP server (this is a physical printer). Then click the
ņ
Apply
Ň
button.
E.Then, in the
ņ
Auto Link Printer List
Ň
you can see a newly created
item that describes the association between the Windows printer and the
physical printer on the server.
F.Then try to issue a print job to the desired printer. You will see the
Control Center will automatically do a link operation and, once the
print job finished, it will automatically do an unlink operation. This is
so-called
ņ
Auto Link / Unlink
Ň
operation.
G.Even you already properly setup an auto-link printer, the Control Center
must be running while a print job is issued. This means you'd better
run the Control Center every time after you login Windows. In order
to skip this manual operation, you can make the Control Center be
run automatically after you login Windows. To do this, choose the
ņ
Configuration
Ň
item in the
ņ
Tools
Ň
menu. The following window will
appear. Click on the check box and then on the
ņ
OK
Ň
button. This
feature is enabled by default.