Planex mini-mfp, Руководство пользователя

Страница: 67 / 101

4
60
Mini-MFP
4
4
4
8
Ŗ
Storage Access Mode
1.Server Mode: In this mode, you can access the USB storage via FTP
or SMB/CIFS protocols. Only FAT16/32 file format is supported in this
mode. This is the default mode.
2.NetUSB Mode: In this mode, you can access the USB storage using
NetUSB technology. In this mode, FAT16/32 and NTFS file formats are
supported, but only one user is allowed to access the storage at the same
time. Please refer to chapter 9 for the details about NetUSB technology.
Ŗ
User Accounts : You can change administrator name and password or
add a user account for SMB/CIFS Print/File server and FTP File server.
If you forgot administrator name and password, you must to perform
Restore Factory Default action by plugging in the power adaptor while
pressing the Init button. Please refer to the chapter
ņ
Restore Factory
Defaults
Ň
. Administrator owns the Read-Write Permission for File
servers.
œ
Set Administrator
ų
New Administrator: enter your desired administrator name.
ų
New Password: enter your desired password.
ų
Retype Password: confirm your previous password typing.
œ
User Accounts list
ų
User name: add a new user account for accessing the storage attached to
the Server.
ų
Password: set a password for added user.
ų
Permission: select Read-Only or Read-Write permission to access File
servers.
ų
Add: click Add button, after entering the user name, corresponding
password, and Permission selection. The account will take effect once
shown in the blank below.
ų
Delete: delete the existing user account.