Planet NAS-1000, Руководство пользователя

Страница: 7 / 31

3
LEDs (Front Panel)
Ready
Normally ON.
This blinks during Startup or Shutdown, and turns OFF after the shutdown is
completed.
Error
(Amber)
Normally OFF.
However, it will be On during the power-on self test. Once the self-test is com-
pleted, it will turn OFF. If it stays ON, there is a hardware error.
During a software upgrade, both the Ready and Error LEDs will blink.
Disk Full
Normally OFF.
Blinking indicates the disk is 98% full.
ON indicates the disk is completely full.
Disk
Flashes during normal operation, when the Hard Disk is accessed.
LAN
Flashes during normal operation, when data is transmitted or received via the
LAN.
Buzzer
The buzzer will beep as follows:
1 Beep
Reset button or power switch is pressed.
2 Beeps
Repeated every 5
seconds
for 1 minute.
Disk Server is a DHCP client, but no DHCP Server responded to the
DHCP client request.
3 Beeps
Repeated every 15
seconds
for 3 minutes,
Hard disk usage exceeds 98%.
5 Beeps
Repeated every 15
seconds for 3 minutes.
Disk Server is overheating; automatic shutdown will be performed 3
minutes after 1
st
beep.