Planet ISDN Internet Telephony PBX System IPX-1800N Скачать руководство пользователя

Страница: 51 / 68

PLANET IP PBX user’s manual

Enter settings shown in

Table 5.4

2. Click

APPLY

Table 5.4 Voice Mail Configuration Settings

Field

Description

Voicemail Pilot Number

Number to access voice mail system IVR.

Minimum Message Time

Messages less than this duration will not be notified by e-

mail. E.g., 3 (sec).

Maximum Message Time

Maximum duration allowed for a single message. E.g., 60

(sec).

Maximum number of messages per

account

Maximum number of messages allowed per extension.

SMTP Server

Hostname or IP address of the SMTP server for voicemail

notification.

E-mail from Address

Most SMTP servers require a valid

from

address to accept

a mailing request.

Voicemail Available Space Check

Select to enable the Alarm Email function described below.

Send Alarm Email when Space

Below

Set a threshold in minutes to send an alarm email to the

administrator when the space left is below it.

Voicemail Space Left

Show the available space in Kbytes and minutes.

)

The storage inside IP PBX saves not only voice mails but

also some other stuff, such as CDR and logs. The

remained disk space is all for voice mails, and it is the

“maximum” available voice mail space.

SMTP Server Account

Specify an account ID if the SMTP server requires

authentication for outgoing mails.

SMTP Server Password

Specify the account password if the SMTP server requires

authentication for outgoing mails.

5.5 Meet-me

Prompts

This page allows replacing built-in meet-me conference prompts with user recordings.

Click a language and a prompt in the corresponding lists.

Find a corresponding recording in the local storage.

3. Click

PUT FILE

to complete the replacement.

To reset a prompt back to default, leave the

Upload

box in blank and directly click the

PUT FILE

Note that the replacement is done for the selected Language and Prompt only. Currently only

following prompts could be replaced.

Содержание ISDN Internet Telephony PBX System IPX-1800N





































































Результаты поиска

Содержание ISDN Internet Telephony PBX System IPX-1800N

Отзывы:

Похожие инструкции для ISDN Internet Telephony PBX System IPX-1800N

Бренды по названию

Популярные бренды

Planet ISDN Internet Telephony PBX System IPX-1800N, Руководство пользователя

Результаты поиска

Содержание ISDN Internet Telephony PBX System IPX-1800N

Отзывы:

Похожие инструкции для ISDN Internet Telephony PBX System IPX-1800N

Бренды по названию

Популярные бренды