PLANET IP PBX user’s manual
2.9.2 SIP
UA
SIP UA lists the registration status of each client and remote IP PBX, and the
IP Address/Port
from
where they register. SIP trunk registrations, if any, also show at the end of the list. The
Dynamic
column shows the listed IP address is dynamic or static.
Reg. Progress
is the response code and
message if registration has been attempted but not successful so far.
Slave Registrar
column is used
only under the stackable mode. It indicates with which slave box a SIP client is registered. Blank
means a client is registered with the master box locally.
2.9.3 CDR
Log
The CDR(Call Detail Record) Log shows each call record including Calling and Dialed Numbers,
Caller ID, Destination Interface(trunk if outbound) in use, epochs when the call was made, answered
and ended, and which yield the total and billable durations. The last column denotes the disposition of
a call like answered or not.
2.9.4 System
Events
Event log includes reported events from following system services: NTP, DNS, DHCP, and PPPoE.
2.9.5 Active
Calls
The Active Calls page shows current active calls. Columns Client and Party indicate the involved
extensions or trunks of a call. State shows the state of a call, while Service gives the current action of
the listed Client.
