Planet ISDN Internet Telephony PBX System IPX-1800N Скачать руководство пользователя

Страница: 41 / 68

PLANET IP PBX user’s manual

after stripping.

DID Stripping

A number of leading digits to be stripped from the original

called number. If prefix or stripping has been given but DID

of Extension is not

bynumber

, the result of digit

manipulation is dialed in a DTMF string after the call has

been answered by the DID extension as an automatic 2

dialing.

Language

Preferred language for system instructions heard from the

trunk.

IVR List

Associate an IVR menu with incoming calls to this trunk.

This is mandatory unless the trunk is configured for DID.

Usergroup

of Privilege

When disabled DID, click a usergroup in the list whose

reachability to other usergroups and trunks will be used as

the privilege of inbound calls from this trunk.

)

There may not be appropriate usergroups to select

initially. One can come back later once the expected

usergroup has been added.

Advanced Settings

Select to see more settings shown below.

DTMF Mode

Select a preferred DTMF mode,

RFC 2833

SIP INFO

, for

this trunk in the list. This must match configuration on the

server side. If the user does not know the DTMF mode on

the server side, select

Not sure

from the list, and SDP will

automatically detect the DTMF mode is Inband or

RFC2833.

Try Peer-to-peer RTP

Click

to disable or IP PBX will attempt to notify the two

peers in a conversation to try peer-to-peer RTP

transmission. This is suggested as long as phone and ITSP

side support INVITE or UPDATE method during a

connected call to save the resource of IP PBX. However,

only SIP INFO DTMF mode should enable this since other

DTMF modes require IP PBX being RTP relay server to

support in-line transfer.

Bandwidth Sensitive

Indicate the trunk is over a bandwidth-sensitive link, e.g.

across Internet.

Bandwidth Limitation

Leave it blank to disable or, specifies a limit of bandwidth in

kbps for call admission.

Please refer to 0 for details.

Please refer to 4.2 for details.

Содержание ISDN Internet Telephony PBX System IPX-1800N





































































Результаты поиска

Содержание ISDN Internet Telephony PBX System IPX-1800N

Отзывы:

Похожие инструкции для ISDN Internet Telephony PBX System IPX-1800N

Бренды по названию

Популярные бренды

Planet ISDN Internet Telephony PBX System IPX-1800N, Руководство пользователя

Результаты поиска

Содержание ISDN Internet Telephony PBX System IPX-1800N

Отзывы:

Похожие инструкции для ISDN Internet Telephony PBX System IPX-1800N

Бренды по названию

Популярные бренды