manualshive.com logo in svg

Planet IGSW-24040T, Руководство пользователя

Поделиться
Скачать
Planet IGSW-24040T Скачать руководство пользователя страница 234

User’s Manual of IGSW-24040T 

 

but will get re-enabled when the dead-time expires. The number of seconds left 

before this occurs is displayed in parentheses. This state is only reachable when 

more than one server is enabled. 

 

RADIUS Accounting Servers

 

Object 

Description 

 

# 

The RADIUS server number. Click to navigate to detailed statistics for this server.

 

IP Address 

The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of 

this server. 

 

State 

The current state of the server. This field takes one of the following values: 

Disabled

: The server is disabled. 

Not Ready

: The server is enabled, but IP communication is not yet up and 

running. 

Ready

: The server is enabled, IP communication is up and running, and the 

RADIUS module is ready to accept accounting attempts. 

Dead (X seconds left): Accounting attempts were made to this server, but it did 

not reply within the configured timeout. The server has temporarily been 

disabled, but will get re-enabled when the dead-time expires. The number of 

seconds left before this occurs is displayed in parentheses. This state is only 

reachable when more than one server is enabled. 

 

Buttons 

Auto-refresh 

: Check this box to enable an automatic refresh of the page at regular intervals. 

: 

Click to refresh the page immediately. 

 

 

4.11.8 RADIUS Details 

This page provides detailed statistics for a particular RADIUS server.

 

The RADIUS Authentication/Accounting for Server 

Overview screen in 

Figure 4-11-9

 appears. 

 

234 

 

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды