manualshive.com logo in svg

Planet IGSW-24040T, Руководство пользователя

Поделиться
Скачать
Planet IGSW-24040T Скачать руководство пользователя страница 233

User’s Manual of IGSW-24040T 

 

4.11.7 RADIUS Overview 

This page provides an overview of the status of the RADIUS servers configurable on the Authentication configuration page. The 

RADIUS Authentication/Accounting Server Overview screen in 

Figure 4-11-8

 appears. 

 

Figure 4-11-8

 RADIUS Authentication/Accounting Server Overview Page Screenshot 

 

The page includes the following fields: 

RADIUS Authentication Servers 

Object 

Description 

 

# 

The RADIUS server number. Click to navigate to detailed statistics for this server.

 

IP Address 

The IP address and UDP port number (in <IP Address>:<UDP Port> notation) of 

this server. 

 

State 

The current state of the server. This field takes one of the following values: 

Disabled

: The server is disabled. 

Not Ready

: The server is enabled, but IP communication is not yet up and 

running. 

Ready

: The server is enabled, IP communication is up and running, and the 

RADIUS module is ready to accept access attempts. 

Dead (X seconds left)

: Access attempts were made to this server, but it did not 

reply within the configured timeout. The server has temporarily been disabled, 

 

233 

 

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды