Planet IGSW-24040T Скачать руководство пользователя страница 193

Страница: 193 / 521

User’s Manual of IGSW-24040T

Figure 4-10-2

Access Control List Configuration Page Screenshot

The page includes the following fields:

Object

Description



Ingress Port

Indicates the ingress port of the ACE. Possible values are:

Any

: The ACE will match any ingress port.

Policy

: The ACE will match ingress ports with a specific policy.

Port

: The ACE will match a specific ingress port.



Frame Type

Indicates the frame type of the ACE. Possible values are:

Any

: The ACE will match any frame type.

EType

: The ACE will match Ethernet Type frames.

ARP

: The ACE will match ARP/RARP frames.

IPv4

: The ACE will match all IPv4 frames.

IPv4/ICMP

: The ACE will match IPv4 frames with ICMP protocol.

IPv4/UDP

: The ACE will match IPv4 frames with UDP protocol.

IPv4/TCP

: The ACE will match IPv4 frames with TCP protocol.

IPv4/Other

: The ACE will match IPv4 frames, which are not ICMP/UDP/TCP.



Action

Indicates the forwarding action of the ACE.

Permit

: Frames matching the ACE may be forwarded and learned.

Deny

: Frames matching the ACE are dropped.



Rate Limiter

Indicates the rate limiter number of the ACE. The allowed range is 1 to 15. When

Disabled is displayed, the rate limiter operation is disabled.



Port Copy

Indicates the port copy operation of the ACE. Frames matching the ACE are

copied to the port number. The allowed values are Disabled or a specific port

number. When the Disabled is displayed, the port copy operation is disabled.



Logging

Indicates the logging operation of the ACE. Possible values are:

Enabled

: Frames matching the ACE are stored in the System Log.

Disabled

: Frames matching the ACE are not logged.

Please note that the System Log memory size and logging rate is limited.



Shutdown

Indicates the port shut down operation of the ACE. Possible values are:

Enabled

: If a frame matches the ACE, the ingress port will be disabled.

Disabled

: Port shut down is disabled for the ACE.

193

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды

Planet IGSW-24040T, Руководство пользователя

Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды