manualshive.com logo in svg

Planet IGSW-24040T, Руководство пользователя

Поделиться
Скачать
Planet IGSW-24040T Скачать руководство пользователя страница 2

User’s Manual of IGSW-24040T 

 

Trademarks

 

Copyright © PLANET Technology Corp. 2011. 
Contents subject to which revision without prior notice. 

 

PLANET is a registered trademark of PLANET Technology Corp.    All other trademarks belong to their respective owners. 

Disclaimer 

PLANET Technology does not warrant that the hardware will work properly in all environments and applications, and makes no 
warranty and representation, either implied or expressed, with respect to the quality, performance, merchantability, or fitness for 
a particular purpose. PLANET has made every effort to ensure that this User's Manual is accurate; PLANET disclaims liability 
for any inaccuracies or omissions that may have occurred. 
Information in this User's Manual is subject to change without notice and does not represent a commitment on the part of 
PLANET. PLANET assumes no responsibility for any inaccuracies that may be contained in this User's Manual. PLANET makes 
no commitment to update or keep current the information in this User's Manual, and reserves the right to make improvements to 
this User's Manual and/or to the products described in this User's Manual, at any time without notice. 
If you find information in this manual that is incorrect, misleading, or incomplete, we would appreciate your comments and 
suggestions. 

FCC Warning 

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC 
Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated 
in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and 
used in accordance with the Instruction manual, may cause harmful interference to radio communications. Operation of this 
equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the 
interference at whose own expense.   

CE Mark Warning 

This is a Class A product. In a domestic environment, this product may cause radio interference, in which case the user may be 
required to take adequate measures. 

 

Energy Saving Note of the Device 

This power required device does not support Standby mode operation.   
For energy saving, please remove the power cable to disconnect the device from the power circuit. 
Without removing power cable, the device is will still consuming power from the power source. In the view of Saving the Energy 
and reduce the unnecessary power consuming, it is strongly suggested to remove the power connection for the device if this 
device is not intended to be active.

 

WEEE Warning 

To avoid the potential effects on the environment and human health as a result of the presence of 
hazardous substances in electrical and electronic equipment, end users of electrical and electronic 
equipment should understand the meaning of the crossed-out wheeled bin symbol. Do not dispose of 
WEEE as unsorted municipal waste and have to collect such WEEE separately. 

 

 

Revision 

PLANET Industrail 24-Port 10/100/1000Mbps with 4 Shared SFP Managed Switch User's Manual 

FOR MODEL: IGSW-24040T 

REVISION: 1.0 (MAY. 2011) 

Part No: EM-IGSW-24040T (2080-A93240-000) 

 

2 

 

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды