Planet IGSW-24040T Скачать руководство пользователя страница 221

Страница: 221 / 521

User’s Manual of IGSW-24040T

an EAPOL Success frame when entering the Guest VLAN.

While in the Guest VLAN, the switch monitors the link for EAPOL frames, and if

one such frame is received, the switch immediately takes the port out of the

Guest VLAN and starts authenticating the supplicant according to the port mode.

If an EAPOL frame is received, the port will never be able to go back into the

Guest VLAN if the "Allow Guest VLAN if EAPOL Seen" is disabled.



Port State

The current state of the port. It can undertake one of the following values:

Globally Disabled

: NAS is globally disabled.

Link Down

: NAS is globally enabled, but there is no link on the port.

Authorized

: The port is in Force Authorized or a single-supplicant mode and the

supplicant is authorized.

Unauthorized

: The port is in Force Unauthorized or a single-supplicant mode

and the supplicant is not successfully authorized by the RADIUS server.

X Auth/Y Unauth

: The port is in a multi-supplicant mode. Currently X clients are

authorized and Y are unauthorized.



Restart

Two buttons are available for each row. The buttons are only enabled when

authentication is globally enabled and the port's Admin State is in an

EAPOL-based or MAC-based mode.

Clicking these buttons will not cause settings changed on the page to take effect.

Reauthenticate

: Schedules a reauthentication to whenever the quiet-period of

the port runs out (EAPOL-based authentication). For MAC-based authentication,

reauthentication will be attempted immediately.

The button only has effect for successfully authenticated clients on the port and

will not cause the clients to get temporarily unauthorized.

Reinitialize

: Forces a reinitialization of the clients on the port and thereby a

reauthentication immediately. The clients will transfer to the unauthorized state

while the reauthentication is in progress.

Buttons

Click to refresh the page.

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

221

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды

Planet IGSW-24040T, Руководство пользователя

Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды