Planet IGSW-24040T Скачать руководство пользователя страница 232

Страница: 232 / 521

User’s Manual of IGSW-24040T

applies.



Enabled

Enable the RADIUS Accounting Server by checking this box.



IP Address/Hostname

The IP address or hostname of the RADIUS Accounting Server. IP address is

expressed in dotted decimal notation.



Port

The UDP port to use on the RADIUS Accounting Server. If the port is set to 0

(zero), the default port (1813) is used on the RADIUS Accounting Server.



Secret

The secret - up to 29 characters long - shared between the RADIUS Accounting

Server and the switch.

Authentication Server Configuration

The table has one row for each Authentication Server and a number of columns, which are:

Object

Description



The Authentication Server number for which the configuration below

applies.



Enabled

Enable the Authentication Server by checking this box.



IP Address/Hostname

The IP address or hostname of the Authentication Server. IP address

is expressed in dotted decimal notation.



Port

The TCP port to use on the Authentication Server. If the port is set to 0

(zero), the default port (49) is used on the Authentication Server.



Secret

The secret - up to 29 characters long - shared between the

Authentication Server and the switch.

Buttons

: Click to save changes.

Click to undo any changes made locally and revert to previously saved values.

232

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды

Planet IGSW-24040T, Руководство пользователя

Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды