Planet IGSW-24040T Скачать руководство пользователя страница 118

Страница: 118 / 521

User’s Manual of IGSW-24040T

ingress filtering is disabled (no checkmark).



Accept Frame Type

Determines whether the port accepts all frames or only tagged frames. This

parameter affects VLAN ingress processing. If the port only accepts tagged

frames, untagged frames received on the port are discarded. By default, the field

is set to All.



Link Type

Allow 802.1Q Untagged or Tagged VLAN for selected port.

When adding a VLAN to selected port, it tells the switch whether to keep or

remove the tag from a frame on egress.

Untag

: outgoing frames without VLAN-Tagged.

Tagged

: outgoing frames with VLAN-Tagged.



Q-in-Q Mode

Sets the Managed Switch to QinQ mode, and allows the QinQ tunnel port to be

configured. The default is for the Managed Switch to function in Disable mode.

Disable

: The port operates in its normal VLAN mode. (This is the default.)

MAN Port

: Configures IEEE 802.1Q tunneling (QinQ) for an uplink port to

another device within the service provider network.

Customer Port

: Configures IEEE 802.1Q tunneling (QinQ) for a client access

port to segregate and preserve customer VLAN IDs for traffic crossing the

service provider network.

Set Out layer VLAN tag

ether type

The Tag Protocol Identifier (TPID) specifies the ethertype of incoming packets on

a tunnel access port.

802.1Q Tag

: 8100

vMAN Tag

: 88A8

Default : 802.1Q Tag

The port must be a member of the same VLAN as the Port VLAN ID.

Buttons

: Click to save changes.

: Click to undo any changes made locally and revert to previously saved values.

118

Содержание IGSW-24040T










































































































































































































































































































































































































































































































































Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды

Planet IGSW-24040T, Руководство пользователя

Результаты поиска

Содержание IGSW-24040T

Отзывы:

Бренды по названию

Популярные бренды