PLANETlENW-350-FC
6
(2)
LNK
LED and
10/100
LED
This two LEDs can monitor the link status of the card's
connection. The LNK LED is orange in color, and the
10/100 LED is green colored. The following table shows the
meaning of the two LEDs:
LNK
LED
10/100
LED
Description
off
off
No any valid connection
on
off
10Base-T link is established
on
on
100Base-TX link is established
off
on
Invalid
(3)
FULL
LED:
This LED can monitor the link status of the card's
connection. It is red colored. This LED lights up to indicate
that the connection is in Full-duplex mode.
2.3 Installing the ENW-3502-FC
Follow the procedure below to install the PLANET
ENW-3502-FC
.
1. Turn off the host computer.
2. With the card’ s 68-pin connector facing the PCMCIA CardBus slot,
slide the card all the way into the PCMCIA CardBus slot as
illustrated in Figure 2-3.1.
Do not force the connection.
