CardBus 10/100Mbps Ethernet Card
33
auto detect. The valid port addresses are
xx00 or xx80, where xx = 4 ~ FEH.
[/U]
Allows the client driver to free the resident
program when the card is removed from
the socket.
[/?]
Displays all possible command syntax.
You can also run the CARDGO.EXE by typing “CARDGO” at the DOS
prompt or by including it as a line in your AUTOEXEC.BAT file.
After you executed CARDGO.EXE, you will see the following display
indicating that installation was successful :
Socket
: 0
(for example)
IRQ Number
: 05
(for example)
I/O PORT Base
: 0400H
(for example)
The list of error messages the client driver may display and the
correction methods we suggest are given in
Appendix B
.
ENABLER.EXE
The direct enabler, ENABLER.EXE, directly controls the CardBus
controller of your computer. This program is needed only if you do not
have Card and Socket Services installed. The INSTALL program will
automatically detect whether the Card and Socket Services were
installed. If they were not, the INSTALL program will add a line to your
AUTOEXEC.BAT file using the following syntax and format :
[path]ENABLER.EXE [-il xx] [-io xxxx] [-pi] [-h]
where :
[-il xx]
Specifies the hardware interrupt (IRQ)
where your card will be indicated. Default
value is 5. The option is valid only if the “-
is” option is given.
The valid IRQs are 3,4,5,6,9,10,11,12,15.
[-io xxxx]
Specifies the I/O address. Default value is
auto detect. The valid port addresses are
x000 , where x = Dh ~ Eh.
[-is]
Use ISA interrupt routing.
[-h]
Display the help message.
