PLANETlENW-350-FC
10
Next, check whether your notebook PCMCIA controller supports
CardBus. You can check it from Device Manager (as shown in Figure 3-
2.2). If the PCMCIA socket is shown to be PCIC or TCIC compatible
Controller, then the notebook cannot support CardBus.
Figure 3-2.2 PCMCIA Socket
3.3 Installation
If your notebook meets the system requirements, you can proceed to
install your
ENW-3502-FC
.
Installing the
ENW-3502-FC
is just the same as any normal Windows 95
Plug & Play device. Follow the steps below to install.
1. Insert the
ENW-3502-FC
into an open CardBus slot on your
notebook.
(Note: The hard key of Cardbus slots is different from that of
traditional 16-bit PCMCIA slots, and it can protect the slots from
mis-insertions of cards that do not support Cardbus.)
2. After Windows 95 detects the card, the
Update Device Driver
Wizard
window, as shown in Figure 3-3.1, will appear. Insert the
driver diskette and click “Next” to continue the installation.
