CardBus 10/100Mbps Ethernet Card
31
6.3.1.2 Custom Configuration
To do a custom installation, you need to select the Custom
Configuration Menu after you begin the INSTALL program.
After selecting the Custom Installation Menu, you will see a series of
submenus prompting you to select an IRQ and I/O address.
Interrupt Select
The first submenu which will appear is the Interrupt submenu. To select
an interrupt, move the cursor to the interrupt of your choice and select it
by pressing <Enter>. Interrupts available for your CardBus Fast Ethernet
card include 2, 3, 4, 5, 6, 10, 11, 12 and 15.
Figure 6-3.7 Select Interrupt
IO Port Select
To select an I/O Port, move the cursor to your selected I/O address and
press <Enter> to select. Available I/O Ports are D000H, D4000H,
D800H, E000H, E400H and E800H.
PLANET ENW-3502-FC 10/100 Ethernet Card Installation Program
<Enter> to continue <F3> to return to DOS
SELECT INTERRUPT
Please select the hardware interrupt that you would like your CardBus
10/100Mbps Ethernet Card to use. Use the arrow key to highlight the desired
value. When a value is highlighted press <Enter> to select it.
2
3
4
5
6
10
11
12
15
