2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
92
the location of the motion detection region has no impact on threshold.
Trigger interval
The last configuration item is the trigger interval. It is the time period from the beginning of
the triggered event during which the all motion activities are ignored by the camera. This is
designed to avoid needless repetitive reporting of the same intrusion. Trigger interval 20
seconds would mean that when the even happens, camera will take certain one-time actions
and ignore the continuing activity in the motion detection region for 20 seconds. When 20
seconds are over, the camera will produce a new alarm if there are still action in the motion
detection region, and take actions again.
There is one more item on the Motion Detection configuration page which was not explained
above
– the
Profile of Motion Detection
. Think of them as
Profile 1
(Runtime MD Profile)
and
Profile 2
(Event MD Profile). It means that you can configure two independent groups of
Motion Detection regions with at most 3 regions in each group. Normally, the Profile 1
(Runtime MD Profile) is used as an active profile of the camera. However, in some cases it is
possible to let the camera switch to Profile 2 by using the Event Handler system of the
camera.
For example, you might want to have different motion detection parameters for day and night
time. Then the two profiles become really handy. In such case, remember to configure the
motion detection parameters for both profiles before moving on to configure the event
response system.
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet.