2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
57
Parameters
Description
Dwell time after
missed tracking
(sec)
It is the amount of time (in seconds) when the camera will stay in the
last position where the moving objects are detected.
After the objects being tracked are already out of viewing range and no
other movements are detected within the specified time, the camera
goes back to the viewing position where the Apply button was last
clicked.
Use default zoom
range for tracking
The default zoom range is enabled by default.
To limit the zoom range, follow the procedures below:
1. Use the URL command to get the maximum zoom out and zoom in
position of the camera.
a. Zoom out the camera to desired minimum position.
b. On the address bar, type the URL command
http://
[ip_address:port]
/cgi-bin/cmd/encoder?XYZ_POS_G
ET
c. A confirmation text with the XYZ position, as below, appears.
The last value (Z) is the zoom position. Take note of this value.
d. To get the maximum zoom position, zoom in the camera to the
desired position and repeat steps
b
and
c
.
2. Uncheck
Use default zoom range for tracking
.
3. On
Zoom range for tracking
, type the zoom position values that
you have taken note of. For example, 451 and 1348.
4. Click Apply to save and apply settings.
Stop Scanning
To stop auto tracking, click
.
Restart Scanning
To start or resume auto tracking, click
.