2 Mega-pixel PoE Plus Speed Dome IP Camera
ICA-E6260
66
Parameters
Description
application programs (e.g., NVR).
Streaming Server Port
Select the port used by this IP device for Video Streaming (TCP).
RTSP Server Port
Select the port assigned for RTSP protocol access.
Multicast Setting
allows users to configure the IP addresses and ports for multicast video
and audio (supported models only) streams. Multicast is a protocol where a data stream is
sent only once and shared to requesting devices. This in turn saves network bandwidth.
However, to use this feature, network devices, such as routers and switches, should support
IP multicast.
Parameters
Description
Stream 1
Refers to the video stream 1.
Stream 2
Refers to the video stream 2.
Stream 3
Refers to the video stream 3.
Audio
Refers to the audio stream.
Appears only if the camera model supports audio
input/output.
By Request
When checked, the video or audio stream will be streamed only
to a particular receiver when that receiver sends a request or in
the case of the Network Video Recorder (NVR), select to view or
record the stream. If unchecked, the video or audio stream will
constantly be streamed to the network whether there are devices
viewing the video or not. To save on network bandwidth, it is
recommended to check this function.
Multicast IP
Set the multicast IP of the corresponding stream.
Network Port
Enter the assigned port for the corresponding stream.
Multicast TTL
Enter the multicast TTL (time-to-live) of the corresponding
stream. This value determines the time span (in seconds) when
the packet is retained in the network. When the time expires and
no request is received, the packet is then discarded.
After changing any of the items above, press
Apply
to save the changes. The Reset button
undoes the changes that had just been made but not Applied yet. New port settings will only
take effect after pressing
System -> Save & Reboot
.