Planet Networking & Communication FRT-415N, Руководство пользователя

Страница: 76 / 117

User Manual of FRT-415N
76
addresses and forwards IPv6 multicast data based on these mappings.
Multicast Listener Discovery Snooping (MLD). Enable/Disable the
function to access.
Robust Counter Robust factor of the MLD Counter.
Query Interval
The amount of time between IGMP General Query messages sent by
the router (if the router is a querier on this subnet).
Query Response Interval
The maximum amount of time in seconds that the IGMP router waits to
receive a response to a General Query message. The query response
interval is the Maximum Response Time field in the IGMP v2 Host
Membership Query message header. The default query response
interval is 10 seconds and must be less than the query interval.
Response Interval of
Last Group Member
The amount of time in seconds that the IGMP router waits to receive a
response to a Group-Specific Query message. The last member query
interval is also the amount of time in seconds between successive
Group-Specific Query messages.
5.5.2 UPnP
Choose Service > UPnP and the page shown in the following figure appears. This page is used to configure
UPnP. The system acts as a daemon after you enable it.
Figure 5-56 UPnP