Planet Networking & Communication FRT-415N, Руководство пользователя

Страница: 37 / 117

User Manual of FRT-415N
37
IP Protocol You can select IPv4 , IPv4/IPv6 or IPv6 .
PPP Settings
User Name
Enter the correct user name for PPP dial-up, which is provided by your
ISP.
Password
Enter the correct password for PPP dial-up, which is provided by your
ISP.
Type You can choose Continuous , Connect on Demand , or Manual .
Idle Time (min)
To set the type to Connect on Demand, you need to enter the idle
timeout time. Within the preset minutes, if the router does not detect the
flow of the user continuously, the router automatically disconnects the
PPPoE connection.
WAN IP Settings
Type
You can choose Fixed IP or DHCP .
 To select Fixed IP, you should enter the local IP address, remote IP
address and subnet mask.
 To select DHCP, the router is a DHCP client and the WAN IP
address is assigned by the remote DHCP server.
Local IP Address Enter the IP address of WAN interface provided by your ISP.
Remote IP Address Enter the default gateway of WAN interface provided by your ISP.
Netmask Enter the subnet mask of the local IP address.
Default Route
Select Disable , Enable or Auto . The default setting is Enable .
Unnumbered Select this checkbox to enable IP unnumbered function.
WAN Interfaces Table
This table shows the existing WAN settings. The maximum item of this
table is eight.