Planar m52L, Руководство по установке

Страница: 30 / 124

Selecting the Correct Input
20 m52L Installation Guide
The m52L converts the analog inputs to DVI and makes this available at the Digital
Out connector. This means you can bring in a picture source - UXGA, SXGA, VGA,
1080p - to the first display and connect the rest of the displays in the loop with DVI.
The
advantages of DVI are:
• DVI is less subject to picture degradation than analog methods of loop-
through. (However, even with DVI, loop-through is not infinite.)
• DVI inputs require much less setup and adjustment. You adjust the picture in
the first unit only, the unit with the analog input. Setup time is reduced.
Note: When the analog source is selected, the signal coming from the DVI out connector will
be accepted and displayed by other m52L displays. However, it does not strictly conform to
the DVI standard. Non-Planar units will not be able to display this signal.
Note: Due to copyright protection protocols, the Digital Out connector will be disabled
when viewing the HDCP DVI input.
Depending on which input is selected, the Digital Out connector will show the
picture from the analog input or the digital input.
Selecting the Correct Input
The following table gives you common examples of which devices have which
inputs. In terms of input quality, the table is in order of the most desirable input to
the least desirable input.
Input Found on the Following Devices
DVI Computers with digital out capability
SDI Studio quality video equipment
Analog Computers, laptops
RGB and RGBS from video processors or other professional
equipment (may need BNC to DB15 adapter cable). These
may have separate sync, composite or sync on green.
Component DVD players
Set top boxes (e.g. for cable TV or satellite TV)
Any YPbPr signal
S-Video DVD players
Set top boxes
VCRs
Composite TV tuners
VCRs
Set top boxes