Planar m52L Скачать руководство пользователя страница 23

Страница: 23 / 124

Installing the Video Input Module (VIM)

m52L Installation Guide

Installing the Video Input Module (VIM)

If you receive the optional Video Input Module (VIM) separately, use the following
instructions to install it.

Your VIM shipment should include the following items:

• VIM board

• New VIM cover

• Mounting screws

• Washers/nuts

• Ground strap

Attach the ground strap to your wrist and the chassis.

Turn off the AC power and unplug all cables.

WARNING!

Always turn off power and remove the power cord when adding or removing an

electronic part.

Remove the screws that secure the old VIM cover. Place the screws aside.

Remove the old VIM cover.

WARNING!

Failure to properly use a grounding strap can destroy sensitive electronic com-

ponents in the VIM board.

Remove the VIM board from its shipping pouch and anti-static bag.

Install the VIM board in its place, pressing the VIM board connector into the
control board connector; it is a snug fit.

Install the four screws that secure the VIM board.

Power switch

Power cord

Содержание m52L





























































































































Результаты поиска

Содержание m52L

Отзывы:

Planar m52L, Руководство по установке, Страница: 23 / 124

Результаты поиска

Содержание m52L

Отзывы: