Planar m52L, Руководство по установке, Страница: 104 / 124

Checking Unit Status
94 m52L Installation Guide
Checking Unit Status
Press
MONITOR
on the remote.
Internal Temperature
Indicates the current internal temperature at one point inside the unit. This is not the
highest or the lowest temperature of the unit, nor an indicator of ambient
temperatures.
4 Ensure the power cable is
connected, the power
switch is ON and the front
LED is illuminated.
Reconnect cable or turn on unit.
If your screen shows black or a test pattern
Do This Result Explanation / Further Action
m52L doesn’t respond to remote control
Possible Cause Possible Resolution
Power is not on Confirm that the power cable is connected and
the power switch is on and the front LED is
illuminated.
Remote batteries are dead or improperly
installed Replace or reinstall batteries.
Remote was not aimed at the IR receiver The IR receiver is in the lower right corner (in
landscape mode; in portrait mode, it is in the
lower left corner) of the screen bezel behind a
small hole.
Something is blocking the IR receiver Remove the obstruction.
Your installer or service provider has disabled
the remote control Contact your installer or service provider.
U n i t Sta t u s
m 5 2 L 1 9 2 0 x 1 0 8 0
0 1 0 - 0 7 8 1 R e v 0 0
M o d e I D : 1 2 3 H P e r : 3 1 7 8 V L i n e s : 5 2 5
C u r ta i n o r Te s t P a t t e r n i s d i s p l a y e d
I n t e r n a l Te m p e r a t u r e : 3 2 º C