Planar Dome Md4/PCI, Руководство по установке

Страница: 90 / 162

74 Chapter 2
To customize or add modes
1. Connect a monitor to your installed DOME board.
2. Return to the Settings tab and select the test display
from the Display list.
3. Make sure Extend my Windows desktop onto this
monitor
is selected, and click Apply.
The display extends to the selected test display.
4. Click Advanced -> DOME tab -> Custom Mode.
5. Highlight the Resolution of the mode you want to
change.
6. Edit the Mode Values section of the dialog box to
create the mode you want.
7. Click Test.
The Display Resolution dialog box appears. The system
is about to test the customized resolution.
8. Click OK to test the mode or Cancel to abort testing.
The test pattern displays on the screen you selected in
the Settings tab.
A message appears indicating that the new mode is
about to be tested.
9. Click OK.
10. Click Save Mode -> OK to save the mode.
Do not test custom modes with the primary display or
any sister devices attached to the primary display.
You must test a mode before you can save it.