Planar Dome Md4/PCI, Руководство по установке

Страница: 138 / 162

122 Chapter 4
Installing the Board in a Digital UNIX
Workstation
The device driver for the Md4/PCI board was developed
on a Digital 500au Personal Workstation. See “Issues with
Digital Personal Workstations” on page 133 for an over-
view of issues you may encounter when using the
Md4/PCI board with a Digital Personal Workstation.
To unpack the board
Remove the Md4/PCI board from its package and from its
protective sleeve, being careful to guard against static dis-
charge to the board.
• Wear an antistatic wrist strap.
• Always keep one hand touching a metal surface to
provide grounding.
• If you can’t perform a step with one hand, use both and
return one occasionally to the bare metal surface.
Before you install the Md4/PCI board in your worksta-
tion, you must first install the driver. See “Installing the
PCI Digital UNIX Driver” on page 114.
Static electricity can damage the board. When touching
the board or parts of the motherboard, take these
precautions: