Planar Dome Md4/PCI, Руководство по установке

Страница: 127 / 162

Installing the Md4/PCI Board in a Sun PCI Workstation 111
Changing the Console
The console appears on the first head on the first board
in the system’s probe list by default. You can change the
console with the
pci-probe-list
environment variable.
If you want to change the console without changing the
probe list, change the
output-device
environment
variable instead.
You can use the
setenv
command to change environment
variables.
To use the setenv command
1. Power on or halt the system to get to the ok> prompt.
2. Type:
setenv output-device <device node>
These examples describe how to change the console
in Ultra 10 and Ultra 30 systems. For more details, refer
to your Sun documentation.
3. To make the Md4/PCI board the console in an Ultra 10
system, type:
setenv output-device /pci/DOME,Md4PCI
For an Ultra 30 system, which has two PCI buses, type:
setenv output-device /pci@X/DOME,Md4PCI
where
X
is the location of the board.
For example, if the board is located at location
1f,4000
, type:
setenv output-device /pci@1f,4000/DOME,Md
4
PCI
4. Reboot the system.
The device node portion of the
setenv
command
differs for different Sun systems and board locations.