Planar Dome Md4/PCI, Руководство по установке

Страница: 83 / 162

Installing the Md4/PCI Board in a PC 67
Using the DOME tab to change display properties
You can change these display properties with the DOME
tab after the display is attached to the Windows 2000
desktop.
To change display properties
1. Log onto Windows 2000 as administrator.
2. Right-click the desktop, and select Properties ->
Settings
tab.
The Settings tab appears.
3. Select Default Monitor on DOME Md2/PCI, Md4/PCI,
Md5/PCI, or Md8/PCI
from the Display box.
4. Click Advanced -> DOME tab to select a resolution and
refresh rate.
The DOME tab appears.
Changing Display Properties
To complete this task… See page…
Change the resolution and refresh rate 68
Select palette options 69
Set monitor preferences 69
Set driver options 69
Set custom syncs 73
Make sure the Extend my Windows desktop onto
this monitor
box is checked.