Planar Dome M2/PCI, Руководство по установке

Страница: 89 / 104

Appendix A | 79
Sun Solaris System
Use this table to change the DIP switch S1 settings for over-
riding the default display resolution. (When you change the
S1 settings, you override the default display mode programmed
on the M2 board.) After you change the settings, reboot the
system to activate the new default display mode.
DOME recommends that you use the default display mode.
All switches on DIP switch S1 must be in the OFF position
for the default display mode to take effect.
DIP Switch S1
Resolution
a
a. In pixels (width x height).
1 2 3 4
1280 x 1024 @ 76 Hz
b
b. Default.
OFF OFF OFF OFF
1280 x 1024 @ 76 Hz ON OFF OFF OFF
1280 x 1024 @ 72 Hz OFF ON OFF OFF
1200 x 1600 @ 76 Hz ON ON OFF OFF
1200 x 1600 @ 66 Hz OFF OFF ON OFF
1600 x 1200 @ 73 Hz ON OFF ON OFF
1408 x 1408 @ 73 Hz OFF ON ON OFF