Planar Dome M2/PCI, Руководство по установке

Страница: 70 / 104

60 | Solaris Driver
Setting the default display
You can change the default display to GrayScale or
PseudoColor.
• To set the default display to 8-bit grayscale, modify the
OWconfig
file to set the display value to
domegray.vda
.
See “To modify the OWconfig file” on page 57.
• To emulate a PseudoColor visual class, start the X server
using
PseudoColor
as the default visual class. Then add
defclass PseudoColor
to the
openwin
command or to
the
Xservers
file.
To set the default class for a one-headed system using the
M2 board, type:
openwin -dev /dev/m2pci.0 defclass PseudoColor
For a two-headed system using the M2 board, type:
openwin -dev /dev/m2pci0.0 defclass PseudoColor\
-dev /dev/m2pci0.1 defclass PseudoColor