Planar Dome M2/PCI, Руководство по установке

Страница: 65 / 104

Configuring Display Settings | 55
Example This example aligns the screen to the bottom-center
position of the framebuffer:
Dtlogin*environment: \
M2_STEREO_SCREEN_POSITION=4
Configuring Display Settings
Before you configure your system for the Sun Common
Desktop Environment (CDE) or OpenWindows, you need
to set the display mode for your board. DOME provides a
default display mode that you can either use or override.
Read the following sections before you configure CDE or
OpenWindows:
• “Using the default display mode” on page 55
• “Overriding the default display mode” on page 56
• “Using Visual Classes” on page 59
Then read the appropriate section for your windowing
environment:
• “Running OpenWindows” on page 64
• “Configuring the Common Desktop Environment” on
page 65
Using the default display mode
DOME configures the M2 board with a default display
mode before shipment. When you use the board as the boot
console, you must connect it to a display capable of showing
this default display mode. See page 69 for information on
making the M2 board the console.
For more information about stereo mode, refer to the
Stereo Library Installation and Developer’s Guide.