36
Operating
1.
Using the magnify feature
2.
3.
4.
Press the
MAGNIFY ON
button on the remote
control.
The picture will be magni
fi
ed, and the MAGNIFY
dialog will appear on the screen. When the
MAGNIFY ON
button is pressed for the
fi
rst time
after the projector is turned on, the picture will be
zoomed by 1.5 times. On the dialog, triangle marks
to show each direction will be displayed.
The display magni
fi
cation of the projector switches in order
with every press of the
MAGNIFY ON
button.
For computer signals, HDMI
TM
(RGB) signals, HDBaseT
TM
signals,
input signals from the LAN, USB TYPE A or USB TYPE B ports
1.5 times
2 times
3 times
4 times
1 time
For video signals, s-video signals, component video signals or
HDMI
TM
(Component) signals
1.5 times
2 times
1 time
While the triangles are displayed on the dialog, use the
▲
/
▼
/
◄
/
►
cursor
buttons to shift the magnifying area.
Press the
MAGNIFY OFF
button on the remote control to exit magni
fi
cation.
MAGNIFY
ON / OFF
buttons
• The MAGNIFY dialog will automatically disappear in several seconds
with no operation. The dialog will appear again if the
MAGNIFY ON
button is
pressed when the dialog has automatically disappeared.
• The magni
fi
cation is automatically disabled when the displaying signal or its
display condition is changed.
• While the magni
fi
cation is active, the keystone distortion condition may vary. It
will be restored when the magni
fi
cation is disabled.
• Some horizontal stripes might be visible on the image while magni
fi
cation is
active.
• This function is not available in the following cases:
- A sync signal in the range not supported is input.
- There is no input signal.
NOTE