background image

64

SCREEN menu

Item

Description

MyScreen Lock

Using the 

/

 buttons turns on/off the MyScreen lock function.

ON 

 OFF

When the ON is selected, the item MyScreen is locked. Use this 

function for protecting the current MyScreen.
• This function cannot be selected when the ON is selected to the 

MyScreen PASSWORD item in SECURITY menu 

(

93

)

.

MESSAGE

Using the 

/

 buttons turns on/off the message function.

ON 

 OFF

When the ON is selected, the following message function works.

“AUTO IN PROGRESS” while automatically adjusting

“NO INPUT IS DETECTED”

“SYNC IS OUT OF RANGE”

“INVALID SCAN FREQ.”

“NOT AVAILABLE”

“+++ FOCUS +++”

“Searching….” while searching for the input

“Detecting….” while an input signal is detected

“AUTO ECO MODE” while starting up with AUTO ECO MODE 

The indication of the input signal displayed by changing 

The indication of the aspect ratio displayed by changing

The indication of the PICTURE MODE displayed by changing

The indication of the ACTIVE IRIS displayed by changing

The indication of the MY MEMORY displayed by changing

The indication of “FREEZE” and “II” while freezing the screen by 

pressing the 

FREEZE

 button.

The indication of the TEMPLATE displayed by changing.

The indication of the ECO MODE displayed by changing.

• When the OFF is selected, please remember if the picture is 

frozen. Do not mistake freezing for a malfunction 

(

37

)

.

(continued on next page)

Содержание CP-WU8451




































































































































Отзывы: