Pixsys ATR227 Series, Руководство пользователя

Страница: 19 / 30

User manual - ATR227 - 19
25
dGt.i.
Digital Input (Password 1234)
Digital input functioning (see par. 7.7)
dis.
Disabled (
Default
)
2.Spv
2 setpoint thresholds
run
Run
tunE
Tune (impulsive digital input). Parameter 8
P.i.d.
must be set as
MAn.
Au.MA.
Automatic/Manual
Act.t.
Regulation type
o.rSt
Output reset (impulsive digital input)
26
d.i.c.t.
Digital Input Contact Type (Password 1234)
Select the digital input inactive contact.
o.c.
Open contact ( Default )
c.c.
Closed contact
27
AL.1
Alarm 1 (Password 1234)
Alarm 1 selection.
dis.
Disabled ( Default )
A. AL.
Absolute / threshold, referring to process
b. AL.
Band alarm
H.d.AL.
Upper deviation alarm
L.d.AL.
Lower deviation alarm
28
A.I.5.o
Alarm 1 State Output (Password 1234)
Alarm 1 output contact and intervention type.
n.o. s.
(N.O. Start) Normally open, active at start ( Default )
n.c. s.
(N.C. Start) Normally closed, active at start
n.o. t.
(N.O. Threshold) Normally open, active on reaching alarm 2
n.c. t.
(N.C. Threshold) Normally closed, active on reaching alarm 2
29
a.1.Hy.
Alarm 1 Hysteresis (Password 1234)
-99.9..99.9 °C/°F. Default : 0.5.°C
2 On activation, the output is inhibited if the controller is in alarm mode. Activates only if alarm condition
reappers, after that it was restored..