Pixsys ATR227 Series, Руководство пользователя

Страница: 18 / 30

18 - ATR227 - User manual
14
c. Ld.
Command Led (Password 5678)
State of the OUT1 led corresponding to the relevant contact
o.c.
ON with open contact
c.c.
ON with closed contact ( Default )
15
c. S.e.
Command State Error (Password 5678)
State of contact for command output in case of error
o.c.
Open contact ( Default )
c.c.
Closed contact
16
c. s.p.
Command Setpoint Protection (Password 1234)
Allows/denies modifications of command setpoint value
free
Modifiable by the user (
Default
)
Lock
Locked
17
c. re.
Command Reset (Password 5678)
Type of reset for command contact (always automatic in P.I.D. functioning)
are.
Automatic Reset
( Default )
mre.
Manual Reset
mre.s.
Manual Reset Stored
(keeps relay status also after an eventual power
failure)
18
c. de.
Command Delay (Password 5678)
Command delay (only in ON / OFF functioning).
-900..+900 seconds.. Default : 0.
Negative: delay in switching off phase.
Positive: delay in activation phase.
19
au.ma.
Automatic / Manual (Password 1234)
Enables automatic/manual selection.
dis.
Disabled (
Default
)
En.
Enabled
En.St.
Enabled stored
21
Sft.G.
Softstart Gradient (Password 5678)
Rising gradient for Soft-Start
0 Disabled.
Default
1-9999 (degrees/hour).
24
S.tim.
Softstart Time (Password 5678)
Max. Softstart duration: the process will follow the gradient only for the time set
on parameter, than moves to the max. power.
00.00 Disabled. Default
00.01-24.00 hh.mm