Chapter 1
PD735 & PD736 User’s Manual
3
••••
Introduction
Interface
Contents
Power Jack
The input power is DC 12V.
Note:
ONLY use power adapter supplied with the package.
Otherwise, the product may be damaged.
RJ-45 LAN Socket
Connect to PC or Hub / Switch.
For connect to 10Base-T Ethernet or 100Base-TX Fast Ethernet
Cabling. This Ethernet port built audio-negotiation protocol which
can detect or negotiate the transmission speed of the network
automatically.
Please use CAT-5 or above cable to connect the Network Camera to
a 100Mbps Fast Ethernet network switch or hub.
Note:
ONLY use one power source, either from DC or from
802.3af Power over Ethernet.
MicroSD Card slot
The IP Camera has built-in a MicroSD card slot which can accepts
MicroSD memory card for image / video event recording.
Audio In
Connect a microphone to the IP Camera, be noted to use actively
microphone (normally with power supplier on microphone) for this
application.
Audio Out
Connect a loud speaker to the IP Camera.
This is for voice alerting and two-way audio. Be noted to use
actively speaker (normally with power supplier on speaker) for this
application.
GPIO
The 7 pin terminal block includes 1 input port and 2 output ports.
Pin
Function
Description
1
GND
Digital Input:
only one set is designed
in this Camera Model. The internal
device is also photo-coupled electrical
relay; and the external device can be
simply an On/Off switch. Each set of
On/Off switch can be connected as one
trigger source.
2
DI
3
GND
4
DO_COM
5
DO_NO2
6
DO_COM
7
DO_NO1
