Chapter 2
PD735 & PD736 User’s Manual
7
••••
Installation and Setup
If the Network LED flashes with green color, it confirms that the Camera has
successfully linked with the Internet.
Figure 2-3 Network (Right LED) Indicators
2.3 Configuring and Finding Camera via Software
You could find
CAM FINDER
utility from the attached Software Package CD.
The
CAM FINDER
is used to find and configure network cameras on the LAN.
This utility is useful for conveniently configuring the network settings of the
device, or for finding a device once the network settings have been modified.
To install the
CAM FINDER
, from the Software Package CD, select CAM
FINDER, then follow the instructions to complete the installation.
NOTE
1. In order to ensure CAM FINDER utility has the best compatibility with Camera,
kindly please goes to the PIXORD website for the latest version downloading.
2. In order to ensure Camera will be assigned IP Address properly, please confirm
the following things.
Always consult your network administrator in order to avoid using a
previously assigned IP address.
Check if the Camera is powered on and correctly connected to the network.
In order to connect to the Web-based user interface of the camera, the host
PC must be in the same subnet. For more information about subnets, please
consult your network administrator.
Network LED should blink with green color
to indicate successful link to the Internet.
Besides, if Orange LED indicator also
light-up at the same time, it means your
camera just connect to Intranet only; not
through Internet Network.