Chapter 1
PD735 & PD736 User’s Manual
2
••••
Introduction
Hardware Overview
Interface
Description
Light Sensor
The Light sensor is for detecting IP Camera environmental
illumination, and if IP Camera was in the dark/night
environment, IR Cut Filter is switched off to let infrared
light pass through for clear night view.
MIC
The IP Camera has built-in an internal microphone, which is
hidden in the pinhole located on the front panel.
Lens Focus Adjustment
Rotate the lens to adjust the focal length to the best image.
If necessary, clean the lens with a soft cotton cloth.
Speaker
The IP Camera has built-in an internal speaker, which is
hidden in the pinhole located on the front panel.
Reset Button
This button is hidden in the pinhole.
Insert a pin into the reset hole to press the reset button and
keep pressed about 3 seconds until PWR LED start
refreshing with orange color.
