21
whole with other operation tools.
Using DIP Switch to Perform Routing
Before using the DIP switch, check that routing operations were not
performed by other tools. Otherwise, the switch function is disabled. If so,
press and hold the rear panel RESET button in decoder for less than five
seconds to enable the DIP switch.
To route the video from source to display, toggle each individual switches of
the front panel DIP switch in decoder to the same positions as these in
encoder. If you want to link the decoder to a different encoder, change the
decoder switch settings in the same way as how the encoder's switch is
positioned. If you want to remove their link relationship, reset decoder to its
factory defaults.
Using PC Configurator to Perform Routing
In addition to matrix switching between encoders and decoders via PC
configurator, it allows users to configure and manage them, including fast
switching, video wall management, parameters setting, etc. For more
information, see the user guide of PC configurator.
Using PC Configurator to Perform Fast Switching
In addition to matrix switching between encoders and decoders via PC
configurator, it allows users to configure them, including HDCP Hybrid and
HDMI Timing Hybrid to function fast switching. For more information, see the
user guide of PC configurator.
